Eliminator ScalePro SESI System Filter
 

System Filter

 
Introduction
 
 
Technical Details
 
 
 

Most poorly maintained or untreated hot water central heating systems suffer from the accumulation of thick sludge deposits. These deposits are usually a mixture of black iron oxide corrosion products, water hardness scales, casting sand, welding debris, non-ferrous metal flakes, paint particles and other undesirable material. The sludge particles can range in size from very large to less than a micron. The smaller particles typically bond to the interior surfaces of components, often causing wear and premature failure of pumps and valves. The heavier types of debris can settle at points of low water flow causing blockages and upsetting the balance of the system, resulting in loss of boiler efficiency and system effectiveness.

Unlike filter units which only contain a simple magnet, and which therefore remove only magnetic debris, the Sentinel System Filter unit controls and removes all types of debris commonly associated with wet central heating systems. It provides fast and effective removal of both magnetic and non magnetic debris, helping to maintain optimum system operation and efficiency once the flushing and inhibiting process has been performed.

  • Compact design
  • Suitable for all types of wet central heating systems
  • Eliminates all types of circulating solids
  • Helps prevent sludge build up
  • Integrated self-cleaning magnet for faster removal of magnetic debris
  • Complements chemical cleaners and treatments
  • Proven technology

Read more about the System Filter here

Watch the System Filter video here

Watch our installation guide on YouTubeTM here


Complies with British Standards BS7593:2006 ' Code of practice for treatment of water in domestic hot water central heating systems' under section 5 'Cleansing’


“Filters which collect magnetite may be beneficial as part of the flushing procedure. These should be used with a chemical cleanser to mobilize the magnetite and aid its transport to the filter.”


The Sentinel System Filter and X800 have been specifically designed to work in conjunction with each other to ensure optimum efficiency and performance.

category_liquids_x800_285
system filtermagnet
 
 
 

The unit is designed to be used in conjunction with the Sentinel range of chemical cleaning and inhibitor products for the control and removal of all types of debris commonly associated with wet central heating systems. It provides fast and effective removal of both magnetic and non magnetic debris, helping to maintain optimum system operation and efficiency once the flushing and inhibiting process has been performed.

The unit utilises a directed water flow pattern, and a special gauze arrangement to direct suspended material down into the bottom of the unit. This effect is enhanced by a strategically located magnet which dramatically accelerates initial removal of magnetite. The collected debris is simply flushed away by opening the ball valve provided at the base of the unit. Just flushing the filter unit as normal will also clean the magnet. Simply open the drain valve for 3 – 5 seconds to clean.

The Sentinel System Filter unit features the following benefits:



  • Removes all types of debris – The unit filters out all suspended material, both magnetic and non-magnetic.
  • Optimised flow design - to yield a specific flow-through pattern to eliminate blockages whilst ensuring the pressure drop across the unit remains low, providing less strain on the pump and consequently maximising energy-saving.
  • Strategically positioned magnet – which dramatically accelerates initial removal of magnetite and that does not have to be removed from the unit in order to be cleaned.
  • Enhances normal chemical cleaning and treating – Once the system has been flushed and inhibited, the use of the filter ensures any remaining magnetic and non-magnetic debris is collected quickly, reducing risk to system components 
  • Easy cleaning and maintenance - Cleaning the unit is easy via a built-in ball valve at the base of the unit to allow it to be emptied without the need for the system to be drained. No dismantling is necessary.
  • Vertical Mounting – Allows the unit to be sited easily.

Technical Specification



Mounting: Vertical

Connectors: 22mm comp

Material: Brass

Total Height: 232mm

Total Width: 130mm

Total Depth: 54mm

Weight: 1.85kg

system filter
 
 
 
 
 
Keep me updated
 
Keep me posted on Sentinel new products, promotions, events and changes in legislations.
 
 
 

Join our Trades Area
 
Get access to our product and safety sheets, selling tools and sales support materials.
 
 
 

 
 
Buy Online at Sentinel
 

Find a Stockist

Find a Stockist
 
Town/Postcode :
Search
 
 

Featured Product

NEW: Sentinel SESI

SESI is a low maintenance, non-polluting device which uses a natural electrolytic process to prevent limescale build up inside pipes and appliances.

By protecting against the build up of limescale, you could help your customers save up to £130 a year on their energy bills.

Find out more 

 
 
 
 
 
 
 

Sentinel is recommended by manufacturers including :

/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/3_alpha.gif/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/2_ariston.gif/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/halstead_28.gif/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/ideal_28.gif/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/1_vokera.gif/uploadedImages/wwwsentinel-solutionsnet/use_for_library_images/approved_by_images/Worcester_28(1).jpg
 
 
 
Sentinel Performance Solutions Ltd | The Heath Business & Technical Park | Runcorn | Cheshire | United Kingdom | WA7 4QX | 01928 588 330