System Filter

The unit is designed to be used in conjunction with the Sentinel range of chemical cleaning and inhibitor products for the control and removal of all types of debris commonly associated with wet central heating systems. It provides fast and effective removal of both magnetic and non magnetic debris, helping to maintain optimum system operation and efficiency once the flushing and inhibiting process has been performed.

The unit does not rely on magnets, but instead utilises a directed water flow pattern and a special gauze arrangement which together force suspended material down into the bottom of the unit, where it collects ready to be drained away by simply opening the ball valve provided at the base of the unit.

The Sentinel System Filter unit features the following benefits:

Removes all types of debris - The unit filters out all suspended materials, both magnetic and non-magnetic.
Optimised flow design - The unit has been designed to yield a specific flow-through pattern to eliminate blockages whilst ensuring the pressure drop across the unit remains low, providing less strain on the pump and consequently maximising energy-saving.
Dosing / Bleed point - Allows easy addition of chemical inhibitors, liquid or concentrate and air-bleeding of the unit during system filling.
Enhances normal chemical cleaning and treating - Once the system has been flushed and inhibited, the use of the filter ensures any remaining magnetic and non-magnetic debris is collected quickly, reducing further risk to system components
Easy cleaning and maintenance - Cleaning the unit is easy via a built-in ball valve at the base of the unit to allow it to be emptied without the need for the system to be drained. No dismantling is necessary.
Vertical Mounting - Allows the unit to be sited easily.

Specification

Fitting: 22mm compression
Material: Brass
Dimensions: H 175mm / L 104mm
Weight: 1.9kg
Volume: 0.32 L
Flow Rate: 0.35 l/s

Product enquiries

Find out more